The first thing you need to do before starting any machining is a set-up of reference of working peace, mold ,fixtures or just a working area.
1. Before measuring a reference of workpiece you should prepare and measure TPC of a sharp tool. Use that tool to set-up a reference
2. Bring TCP of sharp tool to the first point on the work peas which is going to be an origin of reference
3. Go to MENU SETUP > MEASURE > BASE > 3-point and Press ENTER
4. Set a number of base data you want to use for storing data of the reference
5. Set number of sharp toll and press button MEASURE and then press NEXT
6. Move TCP to next point on X positive direction and after that press MEASURE and NEXT again.
7. Move TCP to any point on XY positive plane and that press MESURE and NEXT again. You will see a window with data of the workpiece reference. Press SAVE.
